Descripción
SounDigital 1600.1 EVO 6 – 1600W RMS Monoblock Class D Car Audio Amplifier
Take your car audio system to the next level with the SounDigital 1600.1 EVO 6. Delivering 1600 Watts RMS of clean, high-efficiency Class D power, the EVO 6 generation represents the cutting edge in Brazilian car audio engineering.
Designed for maximum reliability and flexibility, the 1600.1 EVO 6 features a Full-Range frequency response, making it equally capable of driving heavy-hitting subwoofers or powering high-output voice speaker arrays.
Key Advantages & Innovations:
-
EVO 6 Generation Architecture: Advanced thermal layout and updated circuitry increase overall efficiency, ensuring cool operation even during long listening sessions at full output.
-
SounDigital Smart Start (SSS): Connect directly to factory radio speaker lines via the High-Level input. The amplifier automatically detects the signal and powers on/off without a dedicated remote wire.
-
Heavy-Duty Solid Terminals: Integrated heavy-gauge terminal block with Allen head screws guarantees solid power transfer and minimal resistance.
-
Smart Electronic Protection: Modernized protection system instantly safeguards against thermal overload, short circuits, and voltage drops.
Technical Specifications
| Specification | Value / Details |
| 1600.1 EVO 6 – 1 OHM | |
| RMS Power @ 1Ω | 1600 W |
| RMS Power @ 2Ω | 1065 W |
| RMS Power @ 4Ω | 679 W |
| 1600.1 EVO 6 – 2 OHMS | |
| RMS Power @ 1Ω | N/A |
| RMS Power @ 2Ω | 1600 W |
| RMS Power @ 4Ω | 1065 W |
| 1600.1 EVO 6 – 4 OHMS | |
| RMS Power @ 1Ω | N/A |
| RMS Power @ 2Ω | N/A |
| RMS Power @ 4Ω | 1600 W |
| GENERAL SPECIFICATIONS | |
| Frequency Response (-3dB) | 5Hz ~ 20kHz |
| Subsonic Filter / High Pass (12dB/oct) | 5Hz ~ 80Hz |
| Low Pass Filter (12dB/oct) | 80Hz ~ 20kHz |
| Operating Voltage | 10V ~ 16V |
| Signal-to-Noise Ratio (SNR) | 1Ω: 90.3dB | 2Ω: 90.15dB | 4Ω: 90.2dB |
| Input Sensitivity (RCA) | 0.2V (200mV) |
| Musical Current Consumption | 75 A |
| Max Current Consumption (Resistive Load 1kHz @ 12.6V) | 150 A |
| Power Wiring Cable | 25 mm² (3 AWG) |
| Speaker Output Cable | 1Ω: 4.0mm² (11 AWG) | 2Ω/4Ω: 2.5mm² (13 AWG) |
| Recommended Fuse (Musical Use) | 80 A |
| Recommended Battery (Minimum for Musical Use) | 90 Ah |
| Width | 5.07" (12.9 cm) |
| Length | 5.80" (14.7 cm) |
| Height | 2.38" (6.6 cm) |
| Net Weight | 2.64 lbs (1.2 kg) |