Descripción
The HL2000.4 is a 2000W RMS product with 4 CHANNELS of 500W RMS at 2 Ohms and great installation versatility.
It features independent resources on the Front and Rear channels, such as LEVEL to adjust the input signal level and Crossover, allowing you to choose between LOW-PASS, HIGH-PASS, or FLAT (FULL-RANGE) operation.
DIGITAL amplifier with a FULL RANGE response from 19 Hz to 25 KHz.
INSTALLATION TIPS:
16 super tweeters/drivers (horns), with 4 in parallel per channel.
2 channels in Bridge mode at 1000W at 4 Ohms (Front, Rear).
3 channels, with two independent 500W channels and one in Bridge mode at 1000W.
And in Tri-mode with a 4 Ohm speaker in bridge + 2 horns or 2 super tweeters per channel.
TECHNICAL SPECIFICATIONS
| CHARACTERISTICS | HL2000.4 – 2 OHMS |
|---|---|
| Number of Channels | 4 |
| RMS Power at 2 Ohm 12.6V | 4 x 500W RMS (STEREO) |
| RMS Power at 4 Ohm 12.6V | 4 x 290W RMS (STEREO) |
| RMS Power at 2 Ohm 13.8V | 4 x 580W RMS (STEREO) |
| RMS Power at 4 Ohm 13.8V | 4 x 364W RMS (STEREO) |
| Power @ 12.6V Bridge 4 Ohms | 2 x 1000W RMS |
| Power @ 13.8V Bridge 4 Ohms | 2 x 1160W RMS |
| Supply Voltage | 9V ~ 15V DC |
| Frequency Response | 19Hz ~ 26KHz |
| Crossover Low Pass | 90Hz |
| Crossover High Pass | 90Hz |
| Signal to Noise | >90 dB |
| Harmonic Distortion | >0,3 % THD |
| Input Sensitivity | 200mV |
| Input Impedance | 15K OHMS |
| Impedance Output | STEREO: 2 OHMS / BRIDGE: 4 OHMS |
| Consumption with Signal Musical | 96A |
| Consumption with Signal Bass | 192A |
| Dimensions (H x W x D) mm | 77.5 x 235 x 240.5 mm |
| Weight Kg | 2,7 Kg |